Skip directly to content

Survey Draughtsman

Measured Surveys - Floor Plans

We can provide Floor plans or as built plans with varying levels of detail - from simple walls, columns, doors and window surveys, to a fully detailed 3D survey (window sill & head heights, stair riser and going details, door heights, ceiling heights, beam details etc.). As part of our measured surveys, we can also provide other information such as electrical and data points, sanitary fittings, incoming services positions, plant, fire fighting and detection equipment, security equipment and signage.  

Measured Drawings Check

If the accuracy of existing plans are in doubt, we can carry out a check survey, which can be a very cost effective way to bring the existing plans up to date. From yours or your clients existing drawings, we are able to compare distances on the drawing with dimensions taken on site and produce a report indicating where any inaccuracies lie.


 if>

Typical Measured Building Survey Includes:-

  • Any structural or partition walls
  • Doors and windows, window reveals inc. all openings
  • Stairs and lift shafts
  • Sanitary fittings will be indicated but not measured (unless required)
  • Spot heights


Typical Level/Height Information

  • The following levels, heights or vertical dimensions will be provided:
  • Ceiling heights above floor
  • Archway heights above floor
  • Windows – internal cill and head heights above floor
  • Heights of :-Doors above floor and threshold levels at external doors based upon topographical information if supplied.
  • We can also provide a full set of digital photographs, these can also be inserted into the drawings.

 

Typical Elevational Survey Includes:

  • Survey of the elevations as indicated.  
  • External details that shall be surveyed and heights generally will have been 
  • instrumentally derived to produce Elevational Drawings and include:-
  • Outline of building and roofs
  • Rainwater pipes and gutters
  • Ground levels and steps 
  • Doors, windows, ventilation grilles, roof lights, other openings etc..
  • Include mullions and transoms to windows (except for “leaded” lights) and features such as projecting cill, splayed heads and reveals, stone or other  
  • quoins, special detail features at openings etc.
  • Include indication and type (eg: top hung, vertical sliding sash etc) of windows designed to open
  • Include door frames and door panelling, glazing etc, where appropriate
  • String courses (projecting or flush) copings etc
  • Chimney stacks, finials etc with string courses, features etc